GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 89
8-6-6-3 Install the Upper OP Panel/Touch Panel Assembly (cont’d)
4.) Install the Upper OP Panel/Touch Panel Assembly by securing the 5 tabs and 2 hooks.
5.) Install the four screws to the Back Cover from behind.
6.) Install the five OP Panel Knobs.
Figure 8-75 Cables to Upper OP
Be careful not to pinch any of the cables when installing the Upper OP Panel/Touch Panel Assembly.
Figure 8-76 Slots for alignment tabs.
USB - VIDEO (FROM BEP)
USB - UPPER OP PANEL (FROM BEP)
POWER - ON/OFF (FROM BEP)
To Next Page
Loading...
