GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
8 - 112 Section 8-6 - Top Console Parts Replacement Overview
8-6-15-3 Remove the Operator Panel, Lower (cont’d)
4.) On the Bulkhead Bracket, loosen the ESD wire from the Lower Panel.
5.) Pull and lift the Operator Panel assembly up and away. Be careful to not destroy the fingers on each
side of the Operator Panel, Lower.
6.) Store it on an ESD safe place.
Figure 8-99 OP Grounding
Figure 8-100 Remove OP Panel Lower assembly
YELLOW/GREEN GROUND WIRE FROM
LOWER OP HERE
(NOT ILLUSTRATED)
To Next Page
Loading...
