GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 131
8-6-22-3 Alphanumeric Keyboard Assembly removal procedure
The Alphanumeric Keyboard is installed on a rail below the Operator Panel.
Follow the steps below to remove the Alphanumeric Keyboard assembly:
1.) Disconnect the cable (plug) that is connected to the Alphanumeric Keyboard assembly.
2.) Disconnect the ESD cable.
Figure 8-115 Alphanumeric Keyboard
Figure 8-116 Alphanumeric Keyboard seen from below
To Next Page
Loading...
