GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
8 - 134 Section 8-6 - Top Console Parts Replacement Overview
8-6-23-2 Disassemble the A/N Keyboard and the A/N Keyboard Enclosure
1.) Place the Alpha-Numeric Keyboard Assembly on a table with the keys down.
The A/N Keyboard Bottom Enclosure has two holes where you can access two of the fixing tabs to
release them.
2.) Insert a thin screwdriver in one of the provided holes and use it to release the tabs buy pressing as
illustrated with the arrow in the figure below.
3.) Separate the A/N Keyboard Bottom Enclosure from the rest of the A/N Keyboard Assembly.
4.) You can now separate the A/N Keyboard from the A/N Keyboard Top Enclosure, by releasing the
fixing tabs, one by one, until the parts are separated.
Figure 8-117 Release the two tabs
To Next Page
Loading...
