GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 173
8-7-5-3 Drive Gear Assembly installation procedure (cont’d)
3.) Connect the cable from the motor to the XYZ Control Box.
4.) Power up the unit and verify that the XYZ function as intended.
5.) Power down the unit.
6.) Install the Top Cover.
7.) Install the Rear Cover.
8.) Install the Right Side Cover.
9.) Install the Left Side Cover.