GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
8 - 186 Section 8-8 - Main Console parts replacement
8-8-6 Replacing Fan Screen and Fan Screen Frame
8-8-6-1 Remove the Fan Screen and Fan Screen Frame
1.) Remove the fan drawer as describen in the service manual.
2.) Remove the rubber bushings that holds the old fan screens.
3.) Remove the old fan screen and fan screen frame.
8-8-6-2 Install the new Fan Screen and Fan Screen Frame
1.) Place the new fan screen and fan screen frame ontop of the fan.
2.) Place the rivet bushing into the frame screen hole.
Figure 8-164 Remove Rubber Bushings
Figure 8-165 New Fan Screen and Fan Screen Frame ontop of the fan
Figure 8-166 New Fan Screen and Fan Scree Frame ontop of the fan