System Setup
3-46 Vivid E80/E90/E95 – Service Manual
GC091052
Rev. 3
To turn DHCP on
• Select: Obtain an IP address automatically.
To turn DHCP off
1. Select: Use the following IP address:
2. Enter the:
• IP address
• Subnet mask
• Default gateway
To save your new settings and close the open windows
1. Select OK to save the setting and close the Internet
Protocol (TCP/IP) Properties dialog.
2. Select OK to close (and save) the Local Area Connection
Properties dialog.
3. Select Close to close the Local Area Connection Status
dialog.
4. Select the “x” in the upper right corner to close the Network
Connections window.
To Next Page
Loading...
