GE Vivid E95 User Manual

Other Top Console Parts replacement
Vivid E80/E90/E95 – Service Manual 8-59
GC091052 Rev. 3
7. Remove Handle Left Top and Handle Right Top.
Remove the Palm Rest ASSY
Follow this procedure to remove the Palm Rest ASSY:
1. Release the lock mechanisms securing the Palm Rest
ASSY.
2. Remove the Palm Rest ASSY.
Install the Palm Rest ASSY
Follow this procedure to install the Palm Rest ASSY:
1. Ensure the XYZ Buttons cable runs along the lower tray
cable channel so that the cable is not pinched when the
Palm Rest is replaced.
2. Replace the Palm Rest ASSY.
3. Install Handle Left Top and Handle Right Top.
4. Install the lock mechanisms securing the Palm Rest Cover.
5. Replace the Lower Operating Panel.
6. Replace the Upper Operating Panel.
Up-Down Button Board (Buttons Frame UI Assy) replacement
Read and follow
WARNING
Energy Control and Power Lockout for Vivid E80/E90/E95.
When servicing parts of the Ultrasound system where there is
exposure to voltage greater than 30 volts:
1. Follow LOCK OUT/TAG OUT procedures.
2. Turn off the breaker.
3. Unplug the Ultrasound system.
4. Maintain control of the Ultrasound system power plug.
5. Wait for at least 30 seconds for capacitors to discharge as
there are no test points to verify isolation.
Ultrasound System components may be energized.

GE Vivid E95 Specifications

General

Type	Cardiovascular Ultrasound System
Transducers	2D, 3D, 4D
Display	22-inch high-resolution OLED monitor
Portability	Cart-based
Imaging Modes	2D, 3D, 4D, Color Doppler
Advanced Features	cSound Architecture
Connectivity	DICOM, USB, Ethernet
Applications	Cardiology, Vascular, Abdominal