InSite ExC
Vivid E80/E90/E95 – Service Manual 5-9
GC091052 Rev. 3
Initiating a Request for Service (RFS) (continued)
In addition, you can use the Users screen to identify your
institution’s point of contact for service displatches.
Figure 5-6. Users
Exiting InSite ExC
To exit InSite ExC,
1. Press the Left Trackball Set key.
2. Select Connect To GE.
3. Press the Right Trackball Set key.
The GE Technical Support person then exits Disruptive
Mode and VCO.
4. Reboot your Ultrasound system.
To Next Page
Loading...
