GEA D 10 - Temperature & Ejection Alarm Settings

18 8555-9201-000 / 0109
Mechanical Separation / GEA Westfalia Separator
2.2 Alarm settings for temperature and ejection monitoring
Separator model
OSD
HFO
98 °C
105 °C
90 °C
OSD 60
5 A
RPM
LO
95 °C
105 °C
85 °C
OSD 35
3 A
RPM
MDO
40 °C 50 °C 30 °C
OSD 18
0,5 A
RPM
DO
20 °C 30 °C 10 °C
OSD 6
0,5 A
RPM
Remarks
Separating temperature Settings dependent
on state of the energy
supply and the clutch shoes. Settings dependent
on state of the energy
supply and the clutch shoes.
Control
Text d is pla y
TAH product feed Temp. >max Separation “Stop” Alarm #06 Help TAL product feed Temp.< min Separation “Stop”
Alarm #05 Help
Ejection monitor Eject. Curr.< offset Separation “Stop” Alarm #07 Help Ejection monitor Eject. Speed< offset Separation “Stop” Alarm #33 Help
Complete text
Temp. alarm high Alarm is triggered when the pre-set temperature is exceeded. Temp. alarm low Alarm is triggered when the pre-set temperature
is undershot.
Alarm for monitoring the ejection after end of se- parating time or after SMS ejection. The motor current is monitored. Alarm for monitoring the ejection after end of se- parating time or after SMS ejection. The bowl speed is moni- tored.
Alarms
Temperature monitoring TAH product feed Temp. >max TAL product feed Temp.< min Ejection monitoring Eject. Curr.< offset Eject. Speed< offset (option)