GEA ECOspace - Removing the Valve

10.5.3 Removing the Valve
Fig.15
Carry out the following steps:
1.
Undo the screw connections (3).
2.
Remove the valve from the pipe.
®
Done.
10.5.4 Disassembling the Pneumatic Actuator
10.5.4.1 Taking off the Actuator
Fig.16
Carry out the following steps:
1.
Undo the screw connections (1).
2.
Lift off the actuator (A).
®
Done.
Hint!
The red position indication marker (2) is aligned with the hole (B) in
the valve disk so that it indicates the position of the disk in the valve.
Maintenance
Disassembling the Valve
430BAL010337EN_7
29.07.2021 43