Abbreviation Explanation
M Metric
Nm
Unit of measurement of work [newton metre]
TORQUE SPECIFICATION: 1 Nm = 0.737 lbft
Pound-Force (lb) + Feet (ft)
PA Polyamide
PE-LD Low-density polyethylene
PPE Polytetrafluoroethylene
psi
Anglo-American unit of measurement for pressure [pound-
force per square inch]
All pressure data expressed in [bar/psi] is assumed to be
gauge pressure [barg/psig] unless explicitly specified
otherwise.
PTFE Polytetrafluoroethylene
SET-UP
Self-learning installation
During commissioning and maintenance, the SET-UP
procedure carries out all the necessary settings for the
generation of messages.
SW Indicates the size of spanners [width across flats]
T.VIS Tuchenhagen Valve Information System
V AC Volt alternating current
V DC Volt direct current
W Unit of measurement of power [Watt]
TIG
Welding method
Tungsten inert gas welding
Inch
Unit of measurement of length in the Anglo-American
language area
Inch OD
Tube measurement according to British Standard (BS),
outside diameter
Inch IPS American pipe measurement, iron pipe size
Appendix
430BAL008386EN_3
78 07.02.2022
To Next Page
Loading...
Need help?
General
