13
Using the phone
To end the call simply press again or place the handset on the base
Pre-dialing : Pick up handset. Dial the number on the keypad , press the
number is automatically dialled ,
To end the call simply press again or place the handset on the base
Note:
I
f you make an incorrect entry while pre-dialling the telephone number :
- Press C to clear the last digit and then enter the correct number
- Press C for more than one second to clear all digits entered and return to
standby mode.
To insert a dialling pause between numbers when storing a number, press
until P appears in the LCD display
5 - Handsfree mode
This function is used when you don't want to have the handset near your ear or
when you want other people to hear at the same time
When you are in conversation Press until displays , Use and to
adjust the volume 1 to 4
To release hands free mode , do the same as above
To Next Page
Loading...
