24
Enter 1590 or your new code if you changed it
Press OK
Use and to select "Pause Time", then press OK
Use and to choose the time, then press OK
Press twice C or once to return to standby mode
5 - Personnal Identification Number
The base like the handset PIN is pre-set to '1590' ( from factory). This can be
changed - this is recommended for confidentiality.
Use and to select "BS setting"
Press OK
"Base PIN" is displayed
Enter 1590 or your new code if you changed it , then press OK
Use and to select "Set PIN" , then press OK
"HS PIN" is displayed
Enter the old code or factory code, then press OK
"New PIN" is dislayed
Enter your new code using the 0 to 9 keys
Press OK to validate
"Retype PIN" is displayed
Enter your new code again, then press OK
Press twice C or once to return to standby mode
Base Setting
To Next Page
Loading...
