20
Handset setting
"Retype PIN" is displayed
Enter your new code again
Press OK
Press twice C or once to return to standby mode
8 -” One touch” memories
You can store up to 4 numbers in direct memory
Use and to select "HS setting" then press OK
Use and to select "One touch",
Use and to select the memory ( M1 to M4) then press OK
Enter your chosen phone number. If you want to modify a number use the C key
Press OK
"Stored" is displayed
Press twice C to exit or once to return to standby mode
To call one of these numbers, first press then just press the
corresponding button ( M1 to M4) it will be automatically dialled
9- Restore Factory settings
The factory settings can be restored to the telephone
All parameters you have modified will be restored back to those which have been
set in the factory
To Next Page
Loading...
