Geemarc 200 - Additional Handsets and Bases; Registering and Releasing Handsets

33
5 handsets can be registered on the same base
4 bases can be linked for the same network
1 - Register a new handset
Press button ( 8-10secs) on the base until flashes
Use and to select 'HS Register'
Use and to select a base ( default is 1) then press OK
"Searching" : Base number is displayed , then the registering code
"Set PIN" : enter your code, then press OK to confirm
2 - Release a handset
Once the handset is released from the base , you can no longer use the phone
Use and to select "BS setting"
Press OK
"Base PIN" is displayed
Enter 1590 or your new code if you have changed it , then Press OK
Use and to select "Remove HS"
Press OK
example : M23_
M: means the handset N°1 is in use ( can't be released)
Additional Handsets & Bases