Gefen EXT-DSC - Page 17

14
AUTOMATIC DHCP CONFIGURATION
learn how to connect to its HTTP server.
► If the network confi guration of your EXT-DSC unit has already been
modifi ed follow the suggestions in Access HTTP server.
2. Select the Network confi guration page on the left menu under Basic.
► Under Current settings you can read the current network confi guration
of the EXT-DSC unit. In particular you can read the current IP address,
the Host name and the MAC address.
► Under Change settings you can confi gure the network settings of the
EXT-DSC unit.
3. Confi gure the EXT-DSC to use DHCP.
► Set the DHCP radio button instead of Static one.
4. Validate the changes.
► Validate the new network confi guration with the Update button.
► The changes will be valid once the EXT-DSC unit has rebooted. If you
want to immediately reboot the unit, check the Reboot now check box
before pressing the Update button.
5. Re-connect to your EXT-DSC.
► If your DHCP server is confi gured to register new computer to the
DNS you can access your EXT-DSC using the following address Error!
Hyperlink reference not valid..
► Otherwise you need to fi nd the IP address assigned to your EXT-DSC.
This can be done using the “discover device” feature of the DSD for
instance.