ADL300 - Fast installations and commissioning Pag. 18 of 52
4.3.1 Connection of I/O card
All I/O card terminal strips are extractable.
For electrical properties of analog, digital and relay inputs/outputs see section A.2 of the Appendix (ADL300 QS manual, code 1S9QSEN).
Figure 4.3.2-A: terminal strip and connection ADL300B-4/2T
(*) Standard = +24V OUT; +24V IN/OUT versions on request;
(**) Cards with +24V external power supply (+24V IN/OUT versions) must be separated from the external power supply with an external diode. Check
if the diode is already present on the external power supply.
To Next Page
Loading...
