ADL300 - Fast installations and commissioning Pag. 48 of 52
Setting of the multispeed 3 value. Can be selected via digital input, fieldbus, etc.
The selected value is the reference for the S-shaped lift ramp.
Setting of the multispeed 4 value. Can be selected via digital input, fieldbus, etc.
The selected value is the reference for the S-shaped lift ramp.
Setting of the multispeed 5 value. Can be selected via digital input, fieldbus, etc.
The selected value is the reference for the S-shaped lift ramp.
Setting of the multispeed 6 value. Can be selected via digital input, fieldbus, etc.
The selected value is the reference for the S-shaped lift ramp.
Setting of the multispeed 7 value. Can be selected via digital input, fieldbus, etc.
The selected value is the reference for the S-shaped lift ramp.
The speed of the cabin is displayed in m/s.
Setting of the jerk value for the first part of the acceleration.
Setting of the maximum acceleration value.
Setting of the jerk value for the last part of the acceleration.
Setting of the jerk value for the first part of the deceleration.
Setting of the maximum deceleration value.
Setting of the jerk value for the last part of the deceleration.
Setting of the delay time for closing the contactor.
To Next Page
Loading...
