Printed in U.S.A 9 918215/CP0407
Chapter 2
SPECIFICATIONS
DIMENSIONS, MEASURES AND WEIGHTS
Overall Height (top of exhaust pipe) 6’11” (2108 mm)
Minimum Width (transport) 8’5” (2565 mm)
Maximum Width (operating) 10’9” (3277 mm)
Length 7’4” (2235 mm)
Truck Clearance (height from ground to
asphalt hopper floor)
23” (584 mm)
Weight (approximate) 7775 lbs. (3527 kg)
ENGINE
Engine Model Yanmar 3TNV88-XGP
Type Vertical In-line 3-cylinder
Water-cooled Diesel
Horsepower (net) @ Engine Speed 36 (27 kW) @ 3000 rpm
Displacement 100 cu. in. (1.642 L)
Aspiration Natural
Bore and Stroke 3.46” x 3.54” (88 x 90 mm)
Weight 342 lbs. (155 kg)
Power Take Off Location Flywheel side
Direction of Rotation Counter-clockwise (viewed from flywheel side)
Dimensions (L x W x H) 22.2 x 19.1 x 24.4” (564 x 486 x 622 mm)
Max. Torque @ Engine Speed 80 lb.-ft. (108 Nm) @ 1200 rpm
Max. Engine Speed (with no load) 3210±25 rpm
Lubricating System Forced lubrication with trochoid pump
Fuel Injection System Direct Injection
Engine Cooling System 4.0 qts. (3.8 L)
Engine Oil Capacity 7 qts. (6.7 L)
Cooling Fan 14-11/16” (373 mm) dia., 8-blade, pusher type
Starting Aid Intake Air Heater (preheating time: 15 seconds)
SCREED
Main Width 8”-12” (2438-3658 mm)
Hydraulic Vibrator 2500 vpm - maximum
Heat Medium Exhaust (standard); Propane (option)
Variable Hydraulic Screed Extension -
Max. Extension Length
24” (610 mm) w/ 6”strike-off
Maximum Variable Crown/Invert 0”-2” (0-51 mm)
Extension Width 24” (610 mm)
Single-Span Operator Platform Type Stationary (standard)
MATERIAL FLOW
Independent Hyraulic Operated Gates Standard
Gate Cut-Off Plates Option, 6”-36” (152-915 mm)
Gravity-Flow Asphalt Hopper Capacity 4 Tons (3629 Kg)
Independent Hydraulic Operating Augers Located on Gate
Courtesy of Machine.Market
To Next Page
Loading...
