Printed in U.S.A 27 918215/CP0407
1448 PLUS INDICATORS AND CONTROLS
Washdown Sprayer System
(Items 20 & 21, Fig. 3)
The washdown sprayer system is used periodically
each day to wash down parts of the paver with an
asphalt releasing agent.
IMPORTANT: Use only releasing agents
approved for use according to environmental
regulations applicable to the area of paver
operation.
WARNING
Do NOT spray releasing agent on a hot engine.
Hydraulic Fluid Reservoir Fill
(Item 22, Fig. 3)
Remove the hydraulic reservoir fill plug to check
the hydraulic fluid level or to add hydraulic fluid.
NOTE: Before removing the hydraulic
reservoir fill plug (H), allow the fluid to cool
for 10-15 minutes. Slowly loosen the breather
cap on the backwall top console to release
system pressure (shown in “Change Hydraulic
Filter” on page 59).
Paving Alignment Guide
(Item 23, Fig. 3)
The adjustable paving alignment guide (I) is used
to align the paver with a curb or the edge of a
previously laid mat of asphalt.
Fig. 13 - Washdown Fill and Spray Nozzle
Washdown
Reservoir Fill
and Switch
Washdown
Spray
Nozzle
Fig. 14 - Hydraulic Fluid Reservoir Fill
H
Fig. 15 - Paving Alignment Guide
I
Courtesy of Machine.Market
To Next Page
Loading...
