Printed in U.S.A 33 918215/CP0407
Chapter 6
MAINTENANCE
The Maintenance Interval Chart contains the main-
tenance intervals for the service procedures located
in “Service and Storage” on page 53. The “Mainte-
nance Log” on page 34 is for recording the service
procedures performed.
IMPORTANT:Under extreme operating
conditions, more frequent maintenance than
the recommended intervals may be required.
MAINTENANCE INTERVAL CHART
SERVICE
PROCEDURE
Every 10
Hours
(or
Daily)
Every 50
Hours
(or
Weekly)
First 50
Hours
Every
250
Hours
Every
500
Hours
Every
1000
Hours
(or Yearly)
Check Fuel Tank Level
•
Check Fuel Filter
•
Check Engine Oil
•
Check Radiator
Coolant Level
•
Check Fan Belt Tension
•
Check Instruments
Operation
•
Clean Areas Contacting
Asphalt
•
Check General Machine
Operation and Condition
•
Lubricate Appropriate
Grease Points
•
Check Hydraulic
Oil Level
•
Check Battery
•
Change Engine Oil
and Filter
••
Check Screed Bottom
Plate Wear
•
Change Hydraulic Filter
Elements
••
Change Air Cleaner
Element
•
Courtesy of Machine.Market
To Next Page
Loading...
