4-2
26. Specifications and Dimensional Diagrams
Specifications
• Battery type and capacity......65B24L / 12V, 40Ah (5 hours rated capacity)
Type
Rubber crawler
Items Canopy
• Weight (in compliance with SAE standards)
Operating mass lbs. (kg)
3836 (1740)
Machine mass (without implement) lbs. (kg)
2900 (1315)
• Working range and performance
Bucket capacity, standard cu.ft (cu.m) 1.77 (0.050)
Bucket width, standard in. (mm) 17.7 (450)
Maximum digging depth <with the blade down> in. (mm) 86.6 (2200) <90.9 (2310)>
Maximum vertical wall digging depth in. (mm)
72.8 (1850)
Maximum cutting height in. (mm) 145.3 (3690)
Maximum dumping height in. (mm) 103.5 (2630)
Maximum digging radius of the ground in. (mm) 146.1 (3710)
Front minimum swing radius
<with the boom swing right>
in. (mm)
60.4 (1535) <54.3 (1380)>
Boom swing angle : left / right degrees 42 / 65
Maximum digging force (bucket) lbs. (kN) 3418 (15.2)
Travel speed : high / low MPH (km / h) 1.3 (2.1) / 2.6 (4.2)
Swing speed rpm 9.5
Average ground pressure, standard crawler PSI (kPa) 4.1 (28.6)
Hydraulic pump displacement
GPM (L / min)
4.65 (17.6)¯2 <Variable displacement pump>
3.48 (13.2)¯1 <Gear pump>
2.09 (7.9)¯1 <Gear pump>
System relief set pressure PSI (MPa) 2986 (20.6)¯2, 2417 (16.7)¯1, 427 (2.9)¯1
• Engine
Type - Vertical three-cylinder water-cooled diesel engine
Model - 3TNV74F-SPBV
Rated output/revs
HP (kW) /
rpm 14.5 (10.8) / 2400
Displacement
L
0.993
Compression pressure PSI (MPa) 469.3 (3.2) at 250 rpm
Nozzle injection pressure PSI (MPa) 1785 (12.3)
Fan belt (V-belt) size - A35
Generator capacity V / A 12 / 20
Courtesy of Machine.Market
To Next Page
Loading...
