12. Description of Control Devices
2-17
Replacing the fuses
If any electrical equipment does not operate when the
starter switch is set to "ON" or "START", the fuse may have
been blown out. Follow the procedure below:
1) Turn the starter switch key to the “OFF” position.
2) Remove the fuse box cover to take the fuses out.
3) If a fuse is blown out, replace it with a spare fuse of rat-
ed capacity.
Blade fuse
Slow-blow fuse
Remove the slow-blow fuse to check it and replace it if nec-
essary.
Symbol Fuse capacity Circuit name
A 15A
Engine stop solenoid,
Current limiter,
Solenoid feed pump,
Timer
B 15A
Boom light,
Horn,
High-speed valve
C 15A
Indicator box,
Safety relay,
Cut-off valve,
Travel alarm
D 15A Spare fuse
000370-00X
Courtesy of Machine.Market
To Next Page
Loading...
