Gemalto Prox–DU Guide

PC/SC Guide
Prox–DU & Prox–SU
www.gemalto.com
DOC119811A Public Use Page 102/129
3Bh 8Fh 80h 01h 80h 4Fh 0Ch A0h 00h 00h 03h 06h 03h 00h 03h 00h 00h 00h 00h
68h
With:
LL = 0Ch (12 bytes)
SS = 03h (ISO14443-A, part 3)
NN NN = 00h 03h (MIFARE
®
Ultralight)
UU = 68h (TCK)
• The ATR returned by a MIFARE
®
Mini will be:
3Bh 8Fh 80h 01h 80h 4Fh 0Ch A0h 00h 00h 03h 06h 03h 00h 26h 00h 00h 00h 00h
4Dh
With:
LL = 0Ch (12 bytes)
SS = 03h (ISO14443-A, part 3)
NN NN = 00h 26h (MIFARE
®
Mini)
UU = 4Dh (TCK)
Get Data command
This command is used to retrieve information about the inserted smart card. This command
can be used for all kinds of contactless cards.
The command is formatted as follows:
CLA INS P1 P2 Lc Data Le
FFh CAh
INF
00h - - NN
1 byte 1 byte 1 byte 1 byte - - 1 byte
The response is formatted as follows:
Data SW1 SW2
NN bytes 1 byte 1 byte
Where:
INF Info type
INF = 00h means: Card serial
number
(
UID or PUPI
)
is returned
INF = 01h means: All historical bytes
from the ATS of a ISO14443 A card
without CRC are returned
NN Expected length of the data

Gemalto Prox–DU Specifications

General

Brand	Gemalto
Model	Prox–DU
Category	Card Reader
Language	English