Gemalto Prox–DU Guide

PC/SC Guide
Prox–DU & Prox–SU
www.gemalto.com
DOC119811A Public Use Page 85/129
Playing with PC/SC
After the Gem_PCSC installation run the Gem_PCSC tool. The next window will be
displayed:
Figure 11 – Gem_PCSC window at start up
The main window displays the available PC/SC commands. The Gem_PCSC.phb small
window is used to display the current commands stored by the user.
1- Click the “SCardEstablishContext” button to have the list of all the available PC/SC
devices.
The next window will be displayed:
Figure 12 – Gem_PCSC window after “SCardEstablishContext”
2- Perform the following operations to start a communication with the smart card:
• Put a Mifare
®
1K contactless smart card in front of the landing zone of the reader
• In the “Reader Name” box select the contactless interface of the Prox-DU named
“Gemalto Prox-DU Contactless_xxxxxxxx 0” (xxxxxxxx is the reader serial
number printed on the label located in the rear of the casing)
• Click the “SCardConnect” button

Gemalto Prox–DU Specifications

General

Brand	Gemalto
Model	Prox–DU
Category	Card Reader
Language	English