PC/SC Guide
Prox–DU & Prox–SU
www.gemalto.com
DOC119811A Public Use Page 82/129
The two first names belong to the first Prox–DU device. The two next names belong to the
second Prox–DU device.
Note: The application should use the name of the device for connecting the appropriate
smart card interface.
Linux and Mac OS X operating systems
The name will comply with the following string format:
• “Gemalto Prox-DU (xxxxxxxx) N1 00” for the Prox–DU contactless interface
• “Gemalto Prox-DU (xxxxxxxx) N1 01” for the Prox–DU contact interface
• “Gemalto Prox-SU (yyyyyyyy) N2 00” for the Prox–SU contactless interface
• “Gemalto Prox-SU (yyyyyyyy) N2 01” for the Prox–SU contact interface
N1, N2 are numbers delivered by the computer. xxxxxxxx or yyyyyyyy is the 8-byte
reader/writer’s serial number printed on the label located on the rear cabinet.
The next figure displays the name for one Prox–DU connected to the computer:
Figure 6 – Prox–DU PC/SC name (Linux)
The next figure displays the name for one Prox–SU connected to the computer:
Figure 7 – Prox–SU PC/SC name (Linux)
The next figure displays the name for one Prox–DU and one Prox–SU both connected to the
computer:
Figure 8 – Prox–DU and Prox–SU PC/SC names (Linux)
The next figure displays the name for two Prox–DU devices both connected to the
computer:
Figure 9 – Two Prox–DU PC/SC names (Linux)
The two first names belong to the first Prox–DU device. The two next names belong to the
Gemalto Prox-DU (xxxxxxxx) 00 00
Gemalto Prox-DU (xxxxxxxx) 00 01
Gemalto Prox-SU (xxxxxxxx) 00 00
Gemalto Prox-SU (xxxxxxxx) 00 01
Gemalto Prox-DU (xxxxxxxx) 00 00
Gemalto Prox-DU (xxxxxxxx) 00 01
Gemalto Prox-SU (yyyyyyyy) 01 00
Gemalto Prox-SU (yyyyyyyy) 01 01
Gemalto Prox-DU (xxxxxxxx) 00 00
Gemalto Prox-DU (xxxxxxxx) 00 01
Gemalto Prox-DU (yyyyyyyy) 01 00
Gemalto Prox-DU (yyyyyyyy) 01 01
To Next Page
Loading...
