Gemalto SafeNet ProtectServer User Manual

29
netstat
n
Display the current network connections.
ps
p
Display the status of all active processes.
time
t
Display the time currently configured on the
appliance, using the 24 hour clock.
zone
z
Display the currently configured time zone.
Example
psesh:>status cpu
CPU Load Averages:
0.14 0.10 0.08 1/68 11162
System uptime:
At Tue Jan 26 06:35:23 EST 2016, I am up 4 days and 23:38 hours.
Command Result : 0 (Success)
psesh:>status date
Tue Jan 26 06:42:45 EST 2016
Command Result : 0 (Success)
psesh:>status disk
==================+ Hard Disk utilization ===================
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 3681872 697972 2793540 20% /
/dev/sda1 194241 20079 163922 11% /boot
Command Result : 0 (Success)
psesh:>status interface
eth0 Link encap:Ethernet HWaddr 00:0D:48:3B:5E:E4
inet addr:172.20.11.150 Bcast:172.20.11.255 Mask:255.255.255.0
inet6 addr: fe80::20d:48ff:fe3b:5ee4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1431830 errors:0 dropped:0 overruns:0 frame:0
TX packets:557730 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:681075738 (649.5 MiB) TX bytes:272653499 (260.0 MiB)
Interrupt:16 Memory:fe9a0000-fe9c0000
eth1 Link encap:Ethernet HWaddr 00:0D:48:3B:5E:E5
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:269 errors:0 dropped:0 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:29400 (28.7 KiB) TX bytes:2178 (2.1 KiB)
Interrupt:17 Memory:feaa0000-feac0000
ETH0 (Speed|Duplex): 1000Mb/s|Full
ETH1 (Speed|Duplex): Unknown!|Unknown!
Command Result : 0 (Success)

Gemalto SafeNet ProtectServer Specifications

General

Brand	Gemalto
Model	SafeNet ProtectServer
Category	Control Unit
Language	English