Gemalto SafeNet ProtectServer User Manual

1
Chapter 1
Introduction
This Guide is provided as an instructional aid for the installation and configuration of
a SafeNet ProtectServer Network HSM cryptographic services hardware security
module (HSM).
Chapter 2 gives an overview of the product. Both functionality and physical
characteristics are described.
Chapter 3 covers how the product is used to implement a cryptographic service
provider and the setup steps are given. References to further documentation are cited
where needed.
Chapter 4 describes the installation procedure.
Chapter 5 deals with testing and network setting configuration. A troubleshooting
section is included at the end of the chapter.
Chapter 6 provides a command reference for PSESH, the appliance shell interface,
which you use to configure, monitor, and maintain the applaince.
The technical specification for the product is in Appendix A.

Gemalto SafeNet ProtectServer Specifications

General

Brand	Gemalto
Model	SafeNet ProtectServer
Category	Control Unit
Language	English