Gemalto SafeNet ProtectServer User Manual

31
sysconf
Configure the appliance time, date, or SNMP settings, or reboot or power-off the
appliance.
User access
admin, pseoperator
Syntax
sysconf {appliance | snmp | time | timezone}
Parameter
Shortcut
Description
appliance
a
Reboot or power-off the appliance. See “sysconf
appliance”, below.
snmp
s
Configure the SNMP settings on the appliance. See
“sysconf snmp”, below.
time
t
Set the appliance time and date.
timezone
timez
Display or set the appliance timezone. See “sysconf
timezone”, below.
sysconf appliance
Reboot or power-off the appliance.
Syntax
sysconf appliance {poweroff | reboot}
Parameter
Shortcut
Description
poweroff
p
Power-off the appliance.
reboot
r
Reboot the appliance.
sysconf snmp
Enable or disable the SNMP service, or display or configure the SNMP settings for
the appliance.
Syntax
sysconf snmp {config | disable | enable | show}
Parameter
Shortcut
Description
config
c
Configure the SNMP settings for the appliance. See
“sysconf snmp config”, below.
disable
d
Disable SNMP on the appliance and stop the SNMP
service.
enable
e
Enable SNMP on the appliance and start the SNMP
service.

Gemalto SafeNet ProtectServer Specifications

General

Brand	Gemalto
Model	SafeNet ProtectServer
Category	Control Unit
Language	English