EasyManua.ls Logo

Gemmy PLC-012E - Product Handling and Environment; Lifting Safety Warning

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Direction to Clean
Disconnect from power supply prior to clean.
Clean the equipment after every use.
Use a moist cleaning cloth to clean the case, rotor and tube
holders
Dry the equipment thoroughly before operation.
Do not immerse this equipment in water.
Never use benzine or paint thinner for cleaning.
Transportation
Fragile, Handle with Care
Use no hook
Do not drop this equipment
Do not place this equipment upside down.
Pack this equipment in carton box for transportation.
Prevent this equipment from vibrating. Keep it balanced during
transportation.
Storage
Do not place this equipment in the draft, sunlight or near a piece of
equipment that emits heat and electromagnetic conduction
emission.
Disconnect power supply while store this equipment.
This equipment shall be stored under the condition of room
temperature
Do not place any heavy load on this equipment.
Environmental Conditions for Operation & Storage
Temperature 10º C – 40ºC
Humidity 40 % – 90 %
Sea level altitude 4000 meters
Atmospheric pressure range of 700hPa to 1060hPa.
Heavy, Risk of Injury
Model PLC-024 has a mass of 26 kg and more. There is possibility of
Risk of Personal Injury. When lifting and carrying this equipment,
stretch out your hands and lift the equipment from the space between
the ground and the bottom of the equipment as depicted figure.
Upright, do not crouch down, your body to protect your waist.
12

Related product manuals