Safety information
Your GEMMY Universal Centrifuge has been designed with functions,
reliability, and safety in mind. This manual contains important operation
and safety information. The users must carefully read and understand
the contents of this manual prior to installing your centrifuge in
conformance with your local electrical codes.
Classification: This Centrifuge is classified as “Class I” equipment.
CE marking：
：：
：The manufacturer also declares the conformity with the
actual required safety standards in accordance with
LVD 73/23 EEC.
Standards:
This equipment complies with EC Electromagnetic Compatibility
requirement of EN60601-1-2. EMI filter is designed in conformity
with 89/336 EEC-EMC Directive.
ISO9001+13485, GMP (Good Manufacturing Practice), USFDA
This equipment complies with IEC801 series regulations.
Accredited Foreign Medical Device Manufacturer, Japan
Products’ briefing：
：：
：
This equipment is a Class 1 tabletop centrifuge with timers, speed
control and brake control. The motor used is all the same except
PLC-012BP and PLC-024. The difference among 4 models is the
type and operation time of timer, the speed control and braking circuit
and the enclosure.
The motor has a max speed of 14000rpm for PLC-012, PLC-012E and
PLC-012H, and 3500rpm for PLC-024 and fitted with a thermostat to
regulate the operating temperature.
There is no heating element. No applied part for patients and not
suitable for the use in special environment.
1
To Next Page
Loading...
