IMPORTANT：
：：
： BIOHAZARD
This Centrifuge is intended for in-vitro diagnostic use, when the bio
specimen is loaded, such as Blood, Reagent, Urine etc., the user is
strongly requested to wear Gloves and Goggles for protection.
WARNING！
！！
！
(PLC-024)
Heavy, Risk of Injury
CAUTION：
：：
：
If the equipment is used in a manner not specified by the manufacturer,
the protection provider by the equipment may be impaired.
Intended use：
：：
：
This equipment is to provide a laboratory tests in field of biochemistry,
microbic immunity genetics, and also provide a general clinic test for
hematocrit valve (HCT) within the range of speed from 0 – 12000rpm
for test tubes containing in vitro diagnostic specimens for qualitative of
quantitative test procedures.
Refer to the clinic laboratory method specified by the reagent
manufacturer or established by medical technology for products
applications.
Installation:
1、 Untie the packing band；
2、 Open the cover of the carton box;
3、 Carry the suction pump carefully from the carton box;
4、 Remove the plastic bag from the centrifuge;
5、 Keep the packing materials for purpose of the
transportation and storage.
6、 Don’t drop the equipment and don’t place the equipment
upside down.
7、 Check if the standard accessories are included or not.
3
To Next Page
Loading...
