How to use Reading Scale for HCT：
：：
：
When Rotor No. F-2415 is used for the Hematocrit test of HCT value,
the following direction is the way to read the scale:
1、 Remove the capillary tubes from the rotor head carefully；
Warning: Do not let the blood drain out of the tubes.
2、 Place the capillary tubes onto grooves (#1) of tubes holder
carefully； let the extreme end (red blood cells) of capillary tubes
reach the straight line (#3) on right hand of the platform；
3、 Move the tubes holder (#2) to the position where the extreme
end of Leucocyte (#9) meets the diagonal line (#4) on platform；
4、 Move the sliding bar (#5) to meet the demarcation (#7) place
where separates the Leucocyte and red blood cells；
5、 The percentage of HCT is then read directly from the scale (#8)
at upper hand of the reading scale.
NOTE：
：：
：
- Use clay to block the end of capillary tube which has mark on it；
- Refer laboratory method of reading scale to licensed medical
personnel.
2 4 5 8
99 9
7
Red Blood Cell
3 1 6
Red Blood Cells
6
To Next Page
Loading...
