27
Picture
After you enter the Picture menu, the interface shows options including Picture
Mode, Colour Temperature, Aspect Ratio, Noise Reduction, Screen and Backlight.
Press / to select an item and OK to enter the sub-menu.
1. Picture Mode
After you enter the Picture Mode sub-menu, the interface shows options including
Contrast, Brightness, Colour, Sharpness and Tint. Press / to choose Standard-
Soft-User-Dynamic image.
• Press / to select an item.
• Press / to adjust the value of
the selected item.
• Press Quit to return to the parent
menu.
• Press Quit to exit the menu.
When the image mode is User
Note: The Tint option is only eective when the signal system is NTSC
To Next Page
Loading...