EasyManuals Logo

Generac Power Systems 8KW User Manual

Generac Power Systems 8KW
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
MAINTENANCE
Section 4 - Maintenance
Air-cooled Generators
4.12 SERVICE SCHEDULE
ATTENTION: it is recommended that all service work
be performed by the nearest Dealer.
SYSTEM/COMPONENT
X = Action
R = Replace as Necessary
* = Notify Dealer if Repair is
Needed.
FUEL
Fuel lines and connections*
Inspect
PROCEDURE
Change
Clean
FREQUENCY
W = Weekly
M = Monthly
Y = Yearly
X M
LUBRICATION
Oil level X M or 24 hours of
continuous operation.
Oil X 2Y or 200 hours
of operation.**
Oil filter X 2Y or 200 hours
of operation.**
COOLING
Enclosure louvers X X W
BATTERY
Remove corrosion, ensure X X M
dryness
Clean and tighten battery X X M
terminals
Check charge state X R EVERY 6 M
Electrolyte level X R EVERY 6 M
ENGINE AND MOUNTING
Air cleaner X R 2Y or 200 hours
Spark plug(s) X R 2Y or 200 hours
GENERAL CONDITION
Vibration, Noise, Leakage, X M
Temperature*
COMPLETE TUNE-UP* TO BE COMPLETED BY A DEALER 2Y or 200 hours
* Contact the nearest dealer for assistance if necessary.
** Change oil and filter after first eight (8) hours of operation and then every 200 hours thereafter, or 2 years, which-
ever occurs first. Change sooner when operating under a heavy load or in a dusty or dirty environment or in high
ambient temperatures.
28

Other manuals for Generac Power Systems 8KW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems 8KW and is the answer not in the manual?

Generac Power Systems 8KW Specifications

General IconGeneral
BrandGenerac Power Systems
Model8KW
CategoryInverter
LanguageEnglish

Related product manuals