Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, Jun, 2012)
54
FINDEX
Path: Keyword
Type: Executable
Syntax: FINDEX
Notes: This keyword displays version of images in FLASH
FLASH
Path: Keyword
Type: Executable
Syntax: FLASH n
Range: Integer: 0 .. 3
Notes: This keyword uploads a software update using XMODEM (CRC) and programs it into
the given bank of flash memory. Where n = flash bank to program, must be 0 thru
3)
FREQUENCY?
Path: Keyword
Type: Executable
Syntax: FREQUENCY?
Notes: This keyword displays current frequency in megahertz.
G
Path: Keyword
Type: Executable
Syntax: G [!]
Notes: This is a global system update. The optional ! after the G forces transmission of all
status information. The default is to only transmit information that has changed
since the last G command. The port does not need to be in control.
Typical response: Fhhhhhhhh
F Fault status (summarized). See notes on the ‘F’ keyword. The hex mask
indicates which fault tables have faults that just changed. On a “G !”, all fault
tables are indicated to have changes in faults. This hex mask can be used as the
argument for the “F” keyword.
To Next Page
Loading...