Installation
3.3 Input and Output Connections
Refer to Figure 3-1 for a diagram showing the possible Input/Output (I/O)
connections to the DTR. Table 3-1 provides brief descriptions of each connection
or group of connections.
Figure 3-1 L-Band DTR-I/O Connections
NOTE: ACU I/O connections shown for reference only. The DTR may
be interfaced with any ACU having contact closures for beacon
selection and a tracking voltage input or a serial link utilizing the DTR’s
M&C command set.
3-2
CG-1220 DTR
To Next Page
Loading...