Installation
3-14
CG-1220 DTR
3. Setup the communications parameters similar to Table 3-13 below.
TABLE 3-13 EXAMPLE OF COMM PARAMETERS
DTR
ACU
Port1 or 2
BPS = 19200 (max. 57600)
Echo = Disabled
Newline =CR (only)
Shell =M&C Shell
(8 data, No parity, 1 stop bit are
factory set, cannot be changed)
ACU – Port 1-7
BPS = 19200 (max is 38400)
Parity = None
Data Bits = 8
Stop Bits = 1
Shell = DTR
Echo = Disabled
Newline = CR (only)
Checksums = Disabled
Handshake = None
3.5.4 ACU Setup
Proceed with setup of the ACU per the ACU Operation and Maintenance (O&M)
Manual.
To Next Page
Loading...