General Dynamics DIGITAL TRACKING RECEIVER - Page 123

Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, Jun, 2012)
62
Restrictions
Normally multiple commands in the MT M&C shell can be queued up on one line. In the RS-485
shell, commands can be queued, but not after any command that has a response. Only one
command with a response can be on a line, and it must be the last command on the line.
Menu items disabled for the RS-485 shell
/ STATUS LOG
/ STATUS TASKS-DIAG
/ STATUS TROUBLESHOOT
/ TESTS FIFO-TEST
Keywords disabled for the RS-485 shell
LIST-FAULTS
FLASH
HELP
?
help
MTREE
MTREE-HELPS
KEYS
KEYS-HELPS
EXIT
MD
MDR
MC
LS
FINDEX
RESTORE-ROM-DEFAULTS
DOWNLOAD-PARAMS
SPU-FREQUENCY?
X1
S
N
C#
?Y
?V
?W
Added Menu Items
/ CONFIGS COMM-PARAM PORT-3
/ CONFIGS COMM-PARAM PORT-3 BPS
/ CONFIGS COMM-PARAM PORT-3 SHELL
/ CONFIGS COMM-PARAM PORT-3 MASTER-ADDRESS
/ CONFIGS COMM-PARAM PORT-3 SLAVE-ADDRESS
/ CONFIGS COMM-PARAM PORT-3 ADDRESS-OFFSET
/ CONFIGS COMM-PARAM PORT-3 RESET-PORT
/ CONFIGS COMM-PARAM REM-CONTROL (modified) Port-3 added