36 WWW.GENESISRESCUE.COM
5. Applications
5.1 Safety Instructions
WARNING!
Never reach between the blade or spreader arms!
WARNING!
During any work with battery tools, tensioned parts can break or y off,
thereby endangering people.
Uninvolved parties must therefore remain a safe distance away or stay in the
danger zone only as long as necessary.
5.2 Cutting (Cutters, Combi Tools)
The cutting performance of the tool can only be optimally utilized if they are placed as near as
possible to the blades pivot point. The tool may have to be moved back to do this. The tool only
achieves full cutting performance when the rocker switch is fully depressed. Furthermore, it may
take a few seconds until the hydraulic pump reaches the maximum working pressure.
Always cut at a right angle to the cutting material, in order to prevent damage to the blades. Also,
the tips of the shear blades must not be more than 3/16" apart during the cutting process. If this
value is exceeded, the cutting process must be cancelled and then started again.
"uncontrolled if printed"
To Next Page
Loading...