37 WWW.GENESISRESCUE.COM
CAUTION!
Do not sever any parts with loose ends as this can result in personal injury
due to parts ying off.
ATTENTION!
When cutting high-strength vehicle body parts, such as shock absorbers,
hinges or steering columns, the shear blades (arms) may cause severe
damage.
5.3 Pressing (Rescue Rams)
In its closed state, the rescue ram is positioned for pushing away vehicle body parts. Therefore,
make sure that the ram is placed as centrally as possible and at a right angle to the load.
The pushing head can be rotated on the piston rod to guarantee better attachment options.
5.4 Spreading (Spreaders, Combi Tools)
The spreading functions can be used to open doors, lift vehicles and other movable loads, push
vehicle parts away, and squeeze pipes and tie bars. For this, the vehicle must be stably
positioned and supported.
To prevent any sliding during spreading, the arms and tips are serrated inside and out. Spreader
tips also have spikes for a better grip. Additionally, slipping is prevented through early
repositioning of the spreader tip.
"uncontrolled if printed"
To Next Page
Loading...
