1-14
Foreword/Starting your electric vehicle
- If the warning message for V2L
appears on the cluster, refer to the
message entirely.
- If V2L does not operate previously
when you connects another home
appliances, we recommend that
you have your vehicle inspected by
an authorized retailer of Genesis
Branded products.
5. Press the switch (1) to turn off the light
(2) the the V2L will be off. You can
disconnect the V2L connector when
the light (2) turns off or the charging
connecter lock is deactivated pressing
the door unlock button on the smart
key.
Information
• Please connect the V2L connector to the
charging inlet within 60 seconds after
the charging cover opens. To prevent
theft after connecting, it is changed
to auto lock automatically so that it is
impossible to disconnect.
• When using V2L, cancel the scheduled
air conditioning setting. V2L operation
may be blocked by scheduled air
conditioning operation conditions.
Indoor (if equipped)
OJKEVQ011039 OJKEVQ011039
1. Connect to the power outlet located
on the lower right side of the tailgate
with the Vehicle Stop/Start button in
the ON position.
OJKEVQ011021 OJKEVQ011021
2. Use the smart key to unlock the power
outlet cover.
To Next Page
Loading...
