6-64
Driving your vehicle
Rocking the vehicle
If it is necessary to rock the vehicle to 
free it from snow, sand, or mud, first turn 
the steering wheel right and left to clear 
the area around your front wheels. Then, 
shift back and forth between R (Reverse) 
and a forward gear.
Try to avoid spinning the wheels, and do 
not race the vehicle.
To prevent reduction gear wear, wait 
until the wheels stop spinning before 
shifting gears. Release the accelerator 
pedal while shifting, and press lightly on 
the accelerator pedal while the reduction 
gear is in gear. Slowly spinning the 
wheels in forward and reverse directions 
causes a rocking motion that may free 
the vehicle.
 WARNING
If the vehicle is stuck and excessive 
wheel spin occurs, the temperature 
in the tires can increase very quickly. 
If the tires become damaged, a tire 
blow out or tire explosion can occur. 
This condition is dangerous - you and 
others may be injured. Do not attempt 
this procedure if people or objects are 
anywhere near the vehicle.
If you attempt to free the vehicle, the 
vehicle can overheat quickly, possibly 
causing an motor compartment fire or 
other damage. Try to avoid spinning the 
wheels as much as possible to prevent 
overheating of either the tires or the 
motor. DO NOT allow the vehicle to spin 
the wheels above 56 km/h (35 mph).
 Information
The ESC system must be turned OFF 
before rocking the vehicle.
Hazardous driving conditions
When hazardous driving elements 
are encountered such as water, snow, 
ice, mud and sand, take the following 
precautions:
•  Drive cautiously and maintain a longer 
braking distance.
•  Avoid abrupt braking or steering.
•  When your vehicle is stuck in 
snow, mud, or sand, use second 
gear. Accelerate slowly to avoid 
unnecessary wheel spin.
•  Put sand, rock salt, tire chains or other 
non-slip materials under the wheels to 
provide additional traction while the 
vehicle becomes stuck in ice, snow, 
or mud.
 WARNING
Changing the tire speed suddenly could 
cause the tires to skid while driving 
on slippery surface. Be careful when 
driving on slippery surfaces.
SPECIAL DRIVING CONDITIONS