1-32
Foreword/Starting your electric vehicle
Disconnecting charging
connector in emergency
OJKEVQ011061 OJKEVQ011061
If the charging connector does not
disconnect from the charging inlet
due to battery discharge and failure of
electric wires, open the hood and slightly
pull the emergency cable. The charging
connector will be disconnected from the
charging inlet.
AC charge
ORG3EVQ011071ORG3EVQ011071
Actual charger image and charging
method may vary in accordance with the
charger manufacturer.
How to Connect AC Charger
1. Depress the brake pedal and apply the
parking brake.
2. Turn OFF all switches, shift to P (Park),
and turn OFF the vehicle.
If charging is initiated without the
gear in P (Park), the charging will start
after the gear is automatically shifted
to P (Park).
OJKEVQ011041OJKEVQ011041
3. Push the charging door where the
triangle symbol (1) is located to open.
The charging door opens only when
the vehicle is unlocked.
4. Open the inlet cover (2).
Information
If you cannot open the charging door due
to freezing weather, tap lightly or remove
any ice near the charging door. Do not try
to forcibly open the charging door.
To Next Page
Loading...
