Genesis Electrified GV70 - Vehicle to Load (V2 L)

1-13
01
Vehicle to load (V2L)
V2L is the system provides AC power
using the high voltage battery for driving
to operate several electronical products.
OJKEVQ012018LOJKEVQ012018L
Select ‘EV → EV charge transfer’ on the
screen.
You can set the battery discharging limit
for high voltage battery for driving.
OJKEVQ012019LOJKEVQ012019L
If the vehicle reaches to the limit, it
automatically cut supply of electricity.
Energy information
Select ‘EV → Energy information’ on the
screen.
You can check battery discharging level.
How to connect
Outdoor
OJKEVQ011020OJKEVQ011020
1. Open the cover of the V2L connector.
2. Close the cover after connecting
home appliances and electronical
products to the power outlet.
3. Connect the V2L connector to the
charging inlet on the vehicle.
4. Press the switch (1) of the V2L
connector and check whether the
light (2) is on or off. The light (2) may
not turn on normally when:
- See the battery discharging limit
for high voltage battery for driving
in ‘Electricity Use’ menu on the
screen. If it is higher than the
current amounts of high voltage
battery, the light (2) does not turn
on.
- Check whether the light of V2L
connector turns on or not.