Genesis Electrified GV70 - Brake Disc Cleaning

6-38
Driving your vehicle
OJKEV062051LOJKEV062051L
AUTO HOLD turning Off! Press brake
pedal/Turning off AUTO HOLD. Press
brake pedal
When the conversion from Auto Hold to
EPB is not working properly a warning
will sound and a message will appear.
When this message is displayed, Auto
Hold and EPB may not operate. For your
safety, depress the brake pedal.
OIK060071LOIK060071L
Press brake pedal to deactivate AUTO
HOLD
If you did not apply the brake pedal when
you release Auto Hold by pressing the
AUTO HOLD switch, a warning will sound
and a message will appear.
Brake Disc Cleaning
Use the Brake Disc Cleaning function if
noise is generated when depressing the
brake while driving or if the brake disc
gets rusty. It helps reduce the noise and
rust. Regenerative braking is restrained
while Brake Disc Cleaning is operated,
which may lower the electric energy
efficiency.
Press and hold the AUTO HOLD button
for over 3 seconds.
• Brake Disc Cleaning starts operating
when the message ‘Brake disc
cleaning’ is displayed on the
instrument cluster.
• Regenerative braking is restrained
while the brake is depressed
approximately 10 times while driving
(it may differ depending on driving
conditions). It helps reduce the noise
and rust.
• Brake Disc Cleaning function will turn
off automatically when the operation
is completed. It can also be turned
off before operation is completed by
turning off the vehicle or pressing
the AUTO HOLD button for over 3
seconds.