9-34
Maintenance
Motor compartment panel fuse
replacement
Blade fuse / Cartridge fuse
OJKEV091014OJKEV091014
OJKEV091015OJKEV091015
[A]: Blade type fuse, [B]: Cartridge type fuse
1. Turn the vehicle off.
2. Turn all other switches off.
3. Remove the fuse panel cover by
pressing the tap and pulling up.
4. Check the removed fuse; replace it
if it is blown. To remove or insert the
fuse, use the fuse puller in the motor
compartment fuse panel.
5. Push in a new fuse of the same rating,
and make sure it fits tightly in the
clips. If it fits loosely, we recommend
that you consult an authorized retailer
of Genesis Branded products.
NOTICE
After checking the fuse panel in the
motor compartment, securely install
the fuse panel cover. You may hear a
clicking sound if the cover is securely
latched. If it is not securely latched,
electrical failure may occur from water
contact.
Multi fuse
OJKEV091016OJKEV091016
OJKEV091017OJKEV091017
[C]: Multi type, [D]: Midi type
If the multi fuse or midi fuse is blown,
we recommend that you consult an
authorized retailer of Genesis Branded
products.