EasyManua.ls Logo

Genesis Electrified GV70 - 3 D Cluster Setting; Instrument Cluster (for 12.3-Inch 3 D Cluster); Recommendations to Optimize the 3 D Effect; Speed Unit

Genesis Electrified GV70
710 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-37
04
Speed unit (if equipped)
OJKEV042067LOJKEV042067L
When the Speed Unit menu is selected,
press the OK switch on the steering
wheel. You can change the speed unit
setting between km/h and MPH for the
cluster.
3D instrument cluster (for 12.3-
inch 3D cluster)
3D cluster setting
To use the 3D cluster, press the Start/
Stop button to the ON position, and
then select 'Setup → Vehicle Settings
→ 3D cluster depth → Medium/Light' in
infotainment system screen.
To use the cluster 2D, select 'Off'.
For detailed information, scan the QR
code in the separately supplied simple
manual.
Recommendations to optimize the
3D effect
OIK048435OIK048435
Adjust the height of the seat and
steering wheel so that the instrument
cluster and camera module can be
seen at a glance.
The optimal distance to maximize the
3D effect is 75 cm (30 in.). Adjust the
distance between the driver’s seat and
the instrument cluster.
Hold the steering wheel with both
hands and drive in an upright position.

Table of Contents

Other manuals for Genesis Electrified GV70

Related product manuals