1-33
01
5. Check if there is dust on the charging
connector and charging inlet.
6. Hold the charging connector handle
and connect it to the vehicle charging
inlet. Push the connector all the way
in. If the charging connector and
charging terminal are not connected
properly, this may cause a fire and
charging may not start.
Information
Locking Charging Cable
Select ‘EV → Charging Connector
Locking Mode’ in the infotainment system
menu. The charging connector will lock to
the inlet depending upon the locking mode
selected within the infotainment.
• Always mode : The connector locks
when the charging connector is plugged
into the charging inlet.
• While charging mode : The connector
locks when charging starts.
For more details, refer to “Locking
Charging Cable” in this chapter.
7. Connect the charging plug to the
electric outlet at an AC charging
station to start charging.
OJKEVQ011048OJKEVQ011048
OJKEVQ011049OJKEVQ011049
8. Check if the charging indicator light
(
) of the high voltage battery on
the instrument cluster is turned ON.
Charging is not active when the
charging indicator light (
) is OFF.
If the charging cable is not connected
to the vehicle side inlet properly,
charging may not start. In this case,
try reconnecting charging cable to the
vehicle inlet again.
Information
To control the temperature of the high
voltage battery while charging or when
the battery temperature is high, the
air conditioning is used to cool down
the battery. This may generate noise
or vibration from operation of the air
conditioning compressor and cooling fan,
but it is a normal condition when charging
the high voltage battery. Also, the air
conditioning performance may be reduced
due to operation of the cooling system to
charge the high voltage battery. This is a
normal condition.
To Next Page
Loading...
